Fins are widely utilized in many industrial applications for example, fins are used in air cooled finned tube heat exchangers like car radiators, heat rejection devices, refrigeration systems and in condensing central heat exchangers. In this paper, heat transfer inside the fin system composed of a primary rectangular fin with a number of rectangular fins (secondary fins), which are attached on its surface, is modeled and analyzed numerically. The length of the secondary fins decreases linearly from the base of the primary fin to its tip. This modified triangular fin is a kind of improved tree fin networks. The effectiveness of the modified triangular fin is compared with the effectiveness of triangular fin which is calculated analytically. The results show that adding secondary fins increases the effectiveness of triangular fin significantly. Also, it is found that increasing the number of secondary fins in a constant length of primary fin will increase the effectiveness. In addition, by comparing the results it can be concluded that by shortening the length of the primary fin in modified triangular fin, the effectiveness will increase significantly to the contrary of the triangular fin, so smaller heat exchangers can be built by using the modified triangular fin. It is found that in a constant length of primary fin, there is an optimum thickness of secondary fins which maximize the effectiveness of the fin.
High-Pressure Pool-Boiling Heat Transfer Enhancement Mechanism on Sintered-Particle Wick Surface
